RH45E01AXW

T-REX 450 has been the ideal choice for entry level R/C helicopters. To cater to the beginner enthusiasts, Align first introduced RTF (Ready to Fly) T-REX 450 PLUS DFC. Now, Align presents a new flybarless version:T-REX 450 PLUS DFC. Complete with Align T6 2.4G transmitter and newly released 3GX MRS flybarless system, this fully assembled helicopter can be flown immediately just by plugging in a charged battery, allowing the pilot to bypass assembly and adjustment process.

The helicopter utilizes DFC rotor head assembly, paired with 3GX MRS flybarless system optimized for T-REX 450 PLUS flight characteristics. Without any adjustment or tuning, this combo will provide optimal stability suitable for pilots of all levels. 

For those enthusiasts who wish to fine tune 3GX MRS even further, it can be done through a few simple steps. In addition, 3GX MRS has a FHSS 2.4GHz receiver built in, providing an all in one package.

Align T6 R/C system utilizes Futaba 2.4G S-FHSS frequency hopping 6 channel transmitter, with complete helicopter functions such as throttle/pitch curve, stunt mode switch, dual rate and exponential adjustment, etc.

With the addition of the brand new 3GX MRS, the T-REX 450 PLUS DFC pushes past the performance limitation of flybar helicopter, improving both stability and 3D performance, while maintaining a down to earth price level.

Focus Shots

 
RH45E01XW

Newly designed DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision.

RH45E01XW

New 450DFC CCPM Swashplate and main shaft bearing block.

 
RH45E01XW

Brand new battery mount with integrated ESC mount.

RH45E01XW

Newly designed 4 piece upper / lower plate frame system.

 
RH45E01XW

Newly designed servo mount & high precision helical main gear.

RH45E01XW

Newly designed rudder servo mount & dedicated rudder gyro mounting platform.

 
RH45E01XW

New style frame base plate with access window to gyro adjustment.

RH45E01XW

Hoop style horizontal fin mount with longer tail boom supports.

 
RH45E01XW

High precision tail pitch control assembly.

RH45E01XW

ALIGN T6-2.4GHz transmitter.

 
RH45E01XW

Balance Charger RCC-3SX.

RH45E01XW

3S1P 11.1V 2200mAh/30C.

 

Standard equipment

●RCE-BL35P 35A Brushless ESC x 1
●450MX Brushless motor(3400KV) x 1
●DS416M(Metal Gear)Digital servo x 3
●DS425MDigital servo x 1
●3GX MRS Flybarless System x 1
RH45E01XW

Specification

●Length: 634mm
●Height: 205mm
●Main Rotor Diameter: 715mm
●Tail Rotor Diameter: 158mm
●Motor Drive Gear: 11T
●Main Drive Gear: 112T
●Autorotation Tail Drive Gear: 106T
●Tail Drive Gear: 25T
●Drive Gear Ratio: 1:10:4.24
●Flying Weight: Approx. 584g
●Color carton:27.3x10x6.6cm
●Outer carton:56x31x28cm ,24sets/ctn

Accessories

●T-REX 450 Plus DFC Kit Set x 1 set
●3GX MRS Flybarless System x 1 set
●ALIGN T6 6Channel Transmitter x 1
●325 Carbon Fiber Blades-Blue x 1 set
●RCE-BL35P 35A Brushless ESC x 1
●450MX Brushless motor(3400KV) x 1
●DS416M(Metal Gear)Digital servo x 3
●DS425MDigital servo x 1
●3S1P 11.1V 2200 mAh/30C Li-polymer Battery x 1
●Lithlum Battery Balance Charger RCC-3SX x 1 set
●1.5V AA Zinc-Carbon Battery x 4

Radio transmitter and electronic equipment required for assembly:
1.Dial Pitch Gauge or Digital Pitch Gauge 
2.Swashplate Leveler