Retract Servo Hitec HS-75BB (SOLD OUT)

Click to enlarge

Price:	$27.00 (Rp 459,000.00)
Availability:	Out Of Stock
SKU:	HS-75BB
Average Rating:	Not Rated

Description

The HS-75BB is our only Hitec retract servo. Retract means that it was designed specifically for the landing gear of aircraft. If you are thinking about using this servo for another application, you need to know that it is not a proportional servo. It operates like a two position gearbox. It comes with all the mounting hardware, horns and arms shown below.

Detailed Specifications

Control System: +Pulse Width Control 1500usec Neutral

Required Pulse: 3-5 Volt Peak to Peak Square Wave

Operating Voltage: 4.8-6.0 Volts

Operating Temperature Range: -20 to +60 Degree C

Operating Speed (4.8V): 0.45sec/60° at no load

Operating Speed (6.0V): 0.34sec/60° at no load

Stall Torque (4.8V): 91.65 oz/in. (6.6kg.cm)

Stall Torque (6.0V): 113.87 oz/in. (8.2kg.cm)

Operating Angle: 170 Deg. one side pulse traveling 400usec

360 Modifiable: Yes

Direction: Clockwise/Pulse Traveling 1500 to 1900usec

Current Drain (4.8V): 1mA/idle and 150mA no load operating

Current Drain (6.0V): 1.6mA/idle and 180mA no load operating

Dead Band Width: 20usec

Motor Type: 3 Pole Ferrite Motor

Potentiometer Drive: Indirect Switch Drive

Bearing Type: Single Ball Bearing

Gear Type: 1 Metal and 4 POM Resin Gears

Connector Wire Length: 11.81" (300mm)

Dimensions: 1.73" x 0.90"x 0.98" (44 x 23 x 25mm)

Weight: 1.23oz (35g)

Additional Images

There are no additional images for this product.